Brake Line Installation

Any ABS or brake lines should be fixed onto rubbers supplied in the tool bag first, then attach the rubbers to the supplied brake line brackets (two types of brackets).


The brake line brackets will then attach to the coilover; The position of the brake line brackets is determined by the installer.

• Related Articles

• Brake Systems - Frequently Asked Questions

  Do new discs and pads need to be bedded in? Yes, for best performance you should carry out the bedding process. After installation of your Ksport brake system it is highly recommended to follow this procedure: The brakes should feel smooth without ...

• Brake Noise

  Some brake noise is common with big brake kits. The noise is caused by the pad and rotor material and does not signify any defects. Most aftermarket big brake kits do make some noise intermittently until they are warmed up. 

• Do The Big Brake Kits Work With OEM Handbrake?

  Most of our big brake kits for the rear do not support compatibility with OEM handbrakes.  But at times. there are some kits that work. Generally, we put a note on the product listing fitment section that says "WILL WORK with OEM handbrake". ...

• Can I Customize My Ksport Big Brake Kit?

  Yes. All Ksport brake kits are available with several customization options. The calipers come standard in painted colors such as Orange, Red, Black and Yellow. We also offer an option to upgrade to premium high polish finishes as well as Glassy/Hard ...

• How to Release the Redundant Brake Oil from the Caliper Bleed Nipples?

  Please be sure the air in the brake fluid of caliper has been absolutely exhaused. Then, fix the bleed nipples first before doing the step below Please follow the instruction back and forth at least three times to make sure there is no more brake ...