Caliper Mounting Bracket Won't Match
Due to the fact that the location points on the OE caliper mounting bracket have tolerance, check whether the brake disc is centered in the caliper pathway. If not, realign the brake caliper and the brake disc to the optimum position by putting the washer that is 0.25m/m between the caliper and the caliper mounting bracket, or between the caliper mounting bracket and the hub.
Please note that 2 washers at most can be stacked off one bolt and two bolts should be fit.
Related Articles
How to Release the Redundant Brake Oil from the Caliper Bleed Nipples?
Please be sure the air in the brake fluid of caliper has been absolutely exhaused. Then, fix the bleed nipples first before doing the step below Please follow the instruction back and forth at least three times to make sure there is no more brake ...
Custom Color on the Anodized Parts
The only color options we can provide are for our caliper and center bells on our big brake kits.
Why our Piston Dimensions are Smaller then Stock
It is quite common that multi-piston calipers have smaller diameter pistons, this will ensure more uniformity in the pressure distribution on the brake pads. To add, by having pistons of differing sizes in the caliper, our brake designers are able to ...
Do The Big Brake Kits Work With OEM Handbrake?
Most of our big brake kits for the rear do not support compatibility with OEM handbrakes. But at times. there are some kits that work. Generally, we put a note on the product listing fitment section that says "WILL WORK with OEM handbrake". ...
Identifying Your Coilover
When ordering replacement parts for your Ksport coilovers there is some specific information you may be asked to make sure we get you the correct parts you need. The information below can help you have that information ready before you contact us. ...